Remote HID Attacks ā€“ The Build 3.1


GL-iTeen v 0.3

My Teensy 3.1s arrived with another GL-iNet so I can build the GL-iTeen version 0.3 (working title)! See Part 3 ā€“ The Build for my first and second attempts at adding a Teensy to the GL-iNet for the ultimate Penetration Testing weapons. Version 0.2 is a great tool but it looks like this. Iā€™m not a perfectionist but I wanted this build to look neat. I was a little perturbed that the GL-iNet GPIO pins are the less common 2.0mm pitch. I really wanted to mount the Teensy, with its standard 2.54mm pitch, clean on the GL-iNet. After some Googleing I found a 2.0mm to 2.54mm adapter from www.proto-advantage.com.

Figure 1 shows the GL-iNet (model 6416A), a Teensy 3.1, and the pitch adapter.

Figure 1: Project Pieces

I cut the pitch adapter in half, soldiered the appropriate pins (Figure 2), and soldiered it to the GL-iNet (Figure 3).

Figure 2: Pitch Adapter
Figure 3: Pitch Adapter Soldiered to the GL-iNet

Soldier wire to the Data ā€“ and Data + lines of GL-iNet which we will connect to the Teensy (Figure 4).

Figure 4: Wires Soldiered to GL-iNet USB Header

The red wire is Data- and the yellow wire is Data+. Connect them to the D- and D+ on the bottom of the Teensy 3.1. Also soldier a wire to the VCC of the Teensy which we will connect to the 5v header of the GL-iNet (Figure 5).

Figure 5: Soldiered Data- and Data+ Wires to Teensy

Mount and soldier the Teensy 3.1 to the GL-iNet. I also took a single header pin and hot glued it to the GL-iNet and soldiered it to Teensy pin 14. This is just to stabilize the Teensy when we press the button to upload code (Figure 6).

Figure 6: Teensy Soldiered to the GL-iNet

Lastly you soldier 10k ohm resistors to Teensy pins 0-4 and connect them to ground. This is the least neat part of my build as I wanted to use some SMD resistors. But it works. See Figure 7.

Figure 7: SMD Resistors Connected

References
http://www.proto-advantage.com/
GL-iNet and Teensy 2.0 Build

Leave a Reply

Your email address will not be published. Required fields are marked *

 

This site uses Akismet to reduce spam. Learn how your comment data is processed.