JTAG> h
JTAG Commands:
I   Identify JTAG pinout (IDCODE Scan)
B   Identify JTAG pinout (BYPASS Scan)
D   Get Device ID(s)
T   Test BYPASS (TDI to TDO)
Y   Instruction/Data Register (IR/DR) discovery
X   Transfer instruction/data

General Commands:
V   Set target I/O voltage (1.2V to 3.3V)
H   Display available commands
M   Return to main menu

JTAG> B
Enter starting channel [0]:
Enter ending channel [8]: 12
Are any pins already known? [y/N]:
Possible permutations: 17160
Press spacebar to begin (any other key to abort)...
JTAGulating! Press any key to abort...
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TDI: 6
TDO: 7
TCK: 8
TMS: 11
TRST#: 5
Number of devices detected: 1
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BYPASS scan complete.

JTAG>
JTAG> D
TDI not needed to retrieve Device ID.
Enter TDO pin [7]:
Enter TCK pin [8]:
Enter TMS pin [11]:
All other channels set to output HIGH.

Device ID #1: 0000 0000000000000000 00000000000 1 (0x00000001)
-> Manufacturer ID: 0x000
-> Part Number: 0x0000
-> Version: 0x0

IDCODE listing complete.

JTAG> T
Enter TDI pin [6]:
Enter TDO pin [7]:
Enter TCK pin [8]:
Enter TMS pin [11]:
All other channels set to output HIGH.
Number of devices detected: 1
Pattern in to TDI:    00010110100000000110101011011111
Pattern out from TDO: 00010110100000000110101011011111
Match!